Maintaining standards through Brexit and beyond
The Health and Safety Executive (HSE) released data in 2018 showing a 27% increase in construction fatalities in the past year[i]. Then in another blow to the sector, at the start of 2019, a report by Construction News stated that there had been a rise in construction fires between 2015-17[ii].
As an insurer specialising in insurance cover for mid-size contractors, and in particular those working in the electro-technical sector, the statistics are worrying but perhaps indicative of the challenging environment facing contractors today. Challenges that may be exacerbated further as a consequence of Brexit.
The first of these challenges is a shortage of skilled workers. Research in 2017 from specialist underwriter ECIC found that 78% of UK contractors had been impacted by this scarcity[iii]. As Britain’s workforce of skilled contractors has aged, with 500,000 expected to retire in the next ten years,[iv], the younger generation joining the sector has struggled to fill the gap.
The dearth in skills has been filled to some extent by a significant population of migrant workers with 1 in 3 construction firms using this valuable resource, according to research by The Construction Industry Training Board[v]. However, based on the government’s Brexit white paper[vi], this resource is at risk of dissipating after Brexit.
Scarcity of skills may push labour prices higher and increase reliance on subcontractors.
Bringing in ‘subbies’ on site, inevitably, has its own considerations and risks. Electrical contractors must fully appreciate the differences between bona-fide and labour-only subcontractors and what their responsibilities and requirements are to them from a health and safety perspective.
Labour-only subcontractors generally work under the direction of the electrical contractor who will typically provide materials for the job. The electrical contractor’s duties towards labour-only subcontractors are the same as to their own staff. Their health and safety documentation and procedures should reflect this. Electrical contractors must recognise the specific skill and experience of a labour-only subcontractor and consider additional health and safety procedures where necessary.
In comparison, bona-fide subcontractors are generally deemed to be specialist contractors who are responsible for their own systems of work and control the work undertaken by their employees. They are responsible for managing their own health and safety risks for their element(s) of a contract. The electrical contractor should be satisfied that bona-fide subcontractors adopt safe working practices and produces suitable risk assessments and method statements. They should also ensure they carry suitable insurance to cover the works they are undertaking.
It is also important to note that the main contractor on a project will retain responsibility for overall health and safety for a site as detailed in the Construction (Design & Management) Regulations 2015. They have a duty to clearly and effectively communicate health and safety measures and matters relating to risk management to the electrical contractor and their bona-fide subcontractors which usually takes the form of a site induction.
The second challenge is rising material costs. Almost all construction materials are imported and may be subject to tariffs following Brexit. This may lead to reductions in supply as companies become more cautious in their ordering which may in turn drive up costs further. If contractors resort to using cheaper materials this could have massive implications for worker safety during the construction phase and the longer-term safety and integrity of the building.
The hard truth is that aside from the high personal cost of accidents at work, all these factors could give rise to an increase in insurance claims and insurance premiums may increase to correspond with this.
To help mitigate against these risks, seek out an insurance broker who understands your market and the daily risks you face. This will help to ensure you have adequate protection when you need it most. Be honest about your business challenges – your broker may be able to recommend additional protection, such as legal expenses insurance, tax advice or professional indemnity insurance.
Also, invite a risk management expert to review your health and safety processes if you haven’t done this for some time. At the very least, ensure you have a process in place where every worker attends toolbox talks and signs a risk assessment at the start of each job to confirm they have read and understood the risks they will be dealing with and the protective tools and measures they have agreed to take to mitigate those risks. This is not only good practice, but also provides important evidence of health and safety compliance if required.
Preparation and planning are key, as the statistics indicate there is a continuing requirement for electrical contractors to consider how they can protect and manage their businesses in such an uncertain climate.
[edit] References
- [i] http://www.hse.gov.uk/statistics/pdf/fatalinjuries.pdf
- www.hse.gov.uk/statistics/industry/construction/index.htm
- https://www.constructionnews.co.uk/best-practice/health-and-safety/deaths-in-construction-rise-27-year-on-year/10032802.article
- [ii] https://www.constructionnews.co.uk/best-practice/health-and-safety/cn-investigates-the-43-rise-in-deliberately-caused-site-fires/10038588.article
- [iii] Survey undertaken with Construction Enquirer, March 2017, completed by 357 Contractors
- [iv] Labour Force Survey 2016 Q3, ONS, Nisra, retrieved by UK Data Archive https://www.constructionproducts.org.uk/news-media-events/blog/2017/september/the-underlying-challenges-of-the-construction-industry/
- [v] https://www.citb.co.uk/news-events/uk/2017/top-reasons-gb-employers-migrant-workers/
- [vi]https://assets.publishing.service.gov.uk/government/uploads/system/uploads/attachment_data/file/766465/The-UKs-future-skills-based-immigration-system-print-ready.pdf
[edit] About this article
This article was written by Richard Forrest Smith, CEO, ECIC, and first appeared on the website of the Electrical Contractors' Association (ECA) in Febriary 2019. It can be accessed here.
[edit] Related articles on Designing Buildings Wiki
- Articles by the Electrical Contractors' Association (ECA).
- Glossary of electrical terms.
- Institution of Engineering and Technology.
- International Organisation for Standardisation.
- Kitemark.
- Protected circuit.
- Publicly available specification.
- The Future of Electricity in Domestic Buildings.
--ECA
Featured articles and news
CIOB launches global mental health survey
To address the silent mental health crisis in construction.
New categories in sustainability, health and safety, and emerging talent.
Key takeaways from the BSRIA Briefing 2024
Not just waiting for Net Zero, but driving it.
The ISO answer to what is a digital twin
Talking about digital twins in a more consistent manner.
Top tips and risks to look out for.
New Code of Practice for fire and escape door hardware
Published by GAI and DHF.
Retrofit of Buildings, a CIOB Technical Publication
Pertinent technical issues, retrofit measures and the roles involved.
New alliance will tackle skills shortage in greater Manchester
The pioneering Electrotechnical Training and Careers Alliance.
Drone data at the edge: three steps to better AI insights
Offering greater accuracy and quicker access to insights.
From fit-out to higher-risk buildings.
Heritage conservation in Calgary
The triple bottom line.
College of West Anglia apprentice wins SkillELECTRIC gold.
Scottish government launch delivery plan
To strengthen planning and tackle the housing emergency.
How people react in ways which tend to restore their comfort.
Comfort is a crucial missing piece of the puzzle.
ECA launches Recharging Electrical Skills Charter in Wales
Best solutions for the industry and electrical skills in Wales.
New homebuilding skills hub launch and industry response
Working with CITB and NHBC to launch fast track training.